Art.no.: 23617401000/00
Battery-powered tool RIVKLE® NEO B109 with setting process control
The new generation of battery-powered RIVKLE® setting tools designed for the use in large series productions.
This setting force-controlled setting tool with integrated setting process control allows you to control the setting process and is suitable for setting RIVKLE® standard blind rivet nuts made of aluminum (M3-M8), steel (M3-M8) and stainless steel (M3-M6) and for blind rivet studs. With 100% quality control, you'll be able to validate the conformity of each installation.
The RIVKLE® NEO B109 can be connected to a computer and managed using the NEOSOFT application.
Scope of delivery:
• Basic tool
• User manual
• Quick start
• Device purging kit
• Open-end wrench
• Allen wrench
• Makita® lithium-Ion 1,5 Ah, 18v
• Makita® battery charger DC18RC
• Micro USB connection cable
• Practical case for transportation and storage
Mandrels and nosepieces are not included in the scope of delivery and must be ordered separately.
Characteristics:
• Setting method: Force setting
• Setting capacity: 3 kN to 18 kN (M3-M8 steel)
• Weight with battery (without tooling): 2,27 kg
• Maximum stroke: 7,5 mm
• Production rate: 32 RIVKLE® /min*
• Screwing mode (new): Automatic screwing adjustment
• Sequence mode: Automatic unscrewing
• Manual unscrewing button: Yes
• Locking setting force from tool: Yes
• Working light: Yes
*According to Böllhoff procedure
Advantages:
• 3 kN to 18 kN (M3-M8 steel)
• Optimized maintenance (easier and faster)
• Designed and validated for mass production use
• Compatibility with existing RIVKLE® tooling (mandrels and anvils)
• For RIVKLE® blind rivet nuts and studs
Special features of process control:
• Validate the conformity of the installation by checking: the stroke measured in link with the application, optimum positioning of RIVKLE® blind rivet nuts and studs on the tool and the application, the setting force in relation to the size of the chosen RIVKLE® blind rivet nuts and studs
• Archive the parameters of each setting, which can be exported, analyzed and used to visualize setting curves
• Integrated counter to: guarantee compliance with the number of RIVKLE® blind rivet nuts and studs installed per application, anticipate tooling replacement and maintenance (preventative maintenance)
• Detailed error report for easy correction and optimized prevention
• Intuitive RIVKLE® NEOSOFT interface for customizing tool to suit your needs
• Program change directly on the tool (up to 10 programs)
• Rear LED: interaction with the operator to check the conformity of the installation
Information and download RIVKLE® NEOSOFT: Technical Forum
The new generation of battery-powered RIVKLE® setting tools designed for the use in large series productions.
This setting force-controlled setting tool with integrated setting process control allows you to control the setting process and is suitable for setting RIVKLE® standard blind rivet nuts made of aluminum (M3-M8), steel (M3-M8) and stainless steel (M3-M6) and for blind rivet studs. With 100% quality control, you'll be able to validate the conformity of each installation.
The RIVKLE® NEO B109 can be connected to a computer and managed using the NEOSOFT application.
Scope of delivery:
• Basic tool
• User manual
• Quick start
• Device purging kit
• Open-end wrench
• Allen wrench
• Makita® lithium-Ion 1,5 Ah, 18v
• Makita® battery charger DC18RC
• Micro USB connection cable
• Practical case for transportation and storage
Mandrels and nosepieces are not included in the scope of delivery and must be ordered separately.
Characteristics:
• Setting method: Force setting
• Setting capacity: 3 kN to 18 kN (M3-M8 steel)
• Weight with battery (without tooling): 2,27 kg
• Maximum stroke: 7,5 mm
• Production rate: 32 RIVKLE® /min*
• Screwing mode (new): Automatic screwing adjustment
• Sequence mode: Automatic unscrewing
• Manual unscrewing button: Yes
• Locking setting force from tool: Yes
• Working light: Yes
*According to Böllhoff procedure
Advantages:
• 3 kN to 18 kN (M3-M8 steel)
• Optimized maintenance (easier and faster)
• Designed and validated for mass production use
• Compatibility with existing RIVKLE® tooling (mandrels and anvils)
• For RIVKLE® blind rivet nuts and studs
Special features of process control:
• Validate the conformity of the installation by checking: the stroke measured in link with the application, optimum positioning of RIVKLE® blind rivet nuts and studs on the tool and the application, the setting force in relation to the size of the chosen RIVKLE® blind rivet nuts and studs
• Archive the parameters of each setting, which can be exported, analyzed and used to visualize setting curves
• Integrated counter to: guarantee compliance with the number of RIVKLE® blind rivet nuts and studs installed per application, anticipate tooling replacement and maintenance (preventative maintenance)
• Detailed error report for easy correction and optimized prevention
• Intuitive RIVKLE® NEOSOFT interface for customizing tool to suit your needs
• Program change directly on the tool (up to 10 programs)
• Rear LED: interaction with the operator to check the conformity of the installation
Information and download RIVKLE® NEOSOFT: Technical Forum
Range of application:
M 3 - M 8
Weight g:
2270
max. setting force:
18 kN
Packaging unit (pcs.):
1
Product type:
Battery-powered installation tool
Product group:
Tools
Product type:
NEO B109
Translation of the original instruction manual: Electro-hydraulic setting tool for RIVKLE® blind rivet nuts
Translation of the original instruction manual: Electro-hydraulic setting tool for RIVKLE® blind rivet nuts
RIVKLE® NEO B: QUICK START
RIVKLE® NEO B107 and NEO B109: The new generation of setting tools for RIVKLE® blind rivet nuts and studs